Ideal 61-757 TRMS TightSight AC/DC Clamp Meter

The TightSight clamp meter is a CAT IV 600 Volt CAT III 1000 Volt rated auto ranging true root mean square (TRMS) digital clamp meter that measures up to 600 Amp AC and DC current via the clamp head. It measures up to 1000 Volt AC and DC, low impedance AC voltage (LoZ), frequency, resistance, continuity, capacitance and diodes via test-leads (included) and measures temperature (deg F/deg C) via a K-type thermocouple. It’s capable of detecting the presence of voltage between 40 – 600 Volt via a non-contact sensor in the right tip of the clamp. The patented TightSight LCD display, located on the bottom of the unit, enhances safety and productivity by displaying a secondary reading at the end of the meter, eliminating the need to bend or twist conductors or place you head near the panel in order to see the main meter display. Both displays can be backlit and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 Volt, when continuity is detected and when the NCV senses voltage within its set range. The clamp head has a built-in probe tip holder on the backside of the right clamp to allow measurements holding the clamp in one hand and the second lead in the other hand. The meter has a hanging strap mount that allows for a hanging strap to be attached to the meter so it can be hung from a nail, screw or magnetic surface. An industrial grade over molding enhances grip and drop protection. This meter features hold, minimum/maximum, relative, zero, range and selectable auto power off functions. The meter comes with 3 1.5 Volt AAA Batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probe and thermocouple storage.